Perfectly Apply a Screen Protector with the NOVANL Auto Align Device (Without Frustration)

Features	FDX LITE
Pixel resolution	High Definition (HD)
Refresh rate	Fast response
Includes	Camera holder, earpiece mesh and proximity bracket
Temperature	Low and controlled
360° Polarized	Supported
Oil resistant coating	Supported
Anti-glare	Supported
Front Glass	Anti-dust and fingerprint oil
Inspection	Tested before shipment
Warranty	Covered

Tilbage til oversigten

Teknisk information

Perfectly Apply a Screen Protector with the NOVANL Auto Align Device (Without Frustration)

23-02-2026 • Læsetid: 4 min

A screen protector that’s just slightly crooked. An air bubble that won’t disappear. Having to start over while the customer is waiting. They may seem like small issues, but they quietly cost a lot of time, margin, and energy. In this blog, we’ll show you step by step how to use the NOVANL Auto Align Device to apply every screen protector straight and perfectly aligned. Without frustration and without unnecessary waste.

1. Start with a perfectly clean screen

Carefully clean the device’s screen using the Screen Kit Cleaning Spray, then use clean microfiber cloths to make the display completely streak-free and dust-free. A clean screen is essential.

A clean surface prevents air bubbles and adhesion issues. This is the foundation for a smooth and long-lasting installation.

2. Position the device in the Auto Align Device

Place the device correctly into the NOVANL Auto Align Device. Make sure it lies completely flat within the frame and check that it cannot shift. Stable positioning is essential for perfect alignment.

Then press button 1. The device will automatically position the phone in the correct alignment. This prevents crooked placement and eliminates the need for manual adjustments.

3. Place and secure the tempered glass

Place the screen protector (tempered glass) into the alignment device. Make sure the plastic pull tab fits properly into the designated slot. This is important: if the pull tab is not correctly positioned in the opening, the glass may shift or adhere unevenly. Always double-check this before continuing.

Then carefully remove the second protective film from the screen protector. Do not touch the adhesive surface and work carefully to prevent dust from settling on the screen again.

Now press button 2. The device will apply the screen protector to the display in a controlled and even manner. Because the glass is positioned correctly from the start, you prevent air bubbles and eliminate the need for repositioning.

Finally, carefully remove the first protective film. Check the edges, camera cutout, and speaker opening, and, if necessary, lightly wipe the screen with a clean microfiber cloth for a flawless finish.

Extra Tips for Repair Technicians

Always use a clean microfiber cloth.
Work with sufficient lighting above your workbench.
Make the Auto Align Device a standard part of your workflow, combined with the Screen Kit Cleaning Spray.
Turn these steps into a fixed procedure within your team.

Consistency prevents mistakes. Mistakes cost margin.

Conclusion

A crookedly applied screen protector may seem like a small issue, but its impact on your workflow is significant. By combining the NOVANL Auto Align Device with proper preparation, such as cleaning with the Screen Kit Cleaning Spray and using professional microfiber cloths, you ensure a consistent process every time and reduce waste.